More languages
More actions
< Module:Citation | CS1
--[[--------------------------< F O R W A R D D E C L A R A T I O N S >--------------------------------------
]]
local has_accept_as_written, is_set, in_array, set_message, select_one, -- functions in Module:Citation/CS1/Utilities
substitute, make_wikilink;
local z; -- table of tables defined in Module:Citation/CS1/Utilities
local cfg; -- table of configuration tables that are defined in Module:Citation/CS1/Configuration
--[[--------------------------< P A G E S C O P E V A R I A B L E S >--------------------------------------
declare variables here that have page-wide scope that are not brought in from other modules; that are created here and used here
]]
local auto_link_urls = {}; -- holds identifier URLs for those identifiers that can auto-link |title=
--============================<< H E L P E R F U N C T I O N S >>============================================
--[[--------------------------< W I K I D A T A _ A R T I C L E _ N A M E _ G E T >----------------------------
as an aid to internationalizing identifier-label wikilinks, gets identifier article names from Wikidata.
returns :<lang code>:<article title> when <q> has an <article title> for <lang code>; nil else
for identifiers that do not have q, returns nil
for wikis that do not have mw.wikibase installed, returns nil
]]
local function wikidata_article_name_get (q)
if not is_set (q) or (q and not mw.wikibase) then -- when no q number or when a q number but mw.wikibase not installed on this wiki
return nil; -- abandon
end
local wd_article;
local this_wiki_code = cfg.this_wiki_code; -- Wikipedia subdomain; 'en' for en.wikipedia.org
wd_article = mw.wikibase.getSitelink (q, this_wiki_code .. 'wiki'); -- fetch article title from WD; nil when no title available at this wiki
if wd_article then
wd_article = table.concat ({':', this_wiki_code, ':', wd_article}); -- interwiki-style link without brackets if taken from WD; leading colon required
end
return wd_article; -- article title from WD; nil else
end
--[[--------------------------< L I N K _ L A B E L _ M A K E >------------------------------------------------
common function to create identifier link label from handler table or from Wikidata
returns the first available of
1. redirect from local wiki's handler table (if enabled)
2. Wikidata (if there is a Wikidata entry for this identifier in the local wiki's language)
3. label specified in the local wiki's handler table
]]
local function link_label_make (handler)
local wd_article;
if not (cfg.use_identifier_redirects and is_set (handler.redirect)) then -- redirect has priority so if enabled and available don't fetch from Wikidata because expensive
wd_article = wikidata_article_name_get (handler.q); -- if Wikidata has an article title for this wiki, get it;
end
return (cfg.use_identifier_redirects and is_set (handler.redirect) and handler.redirect) or wd_article or handler.link;
end
--[[--------------------------< E X T E R N A L _ L I N K _ I D >----------------------------------------------
Formats a wiki-style external link
NB. Wikidata P1630 has a formatter URL with $1 placeholder for the ID which could be worked into our prefix/id/suffix
string, either overriding local definitions (auto-update) or as fallback for identifiers without local definitions.
But is expensive and could be risky if WD gets vandalized.
See Template_talk:Authority_control/Archive_8#Use_Wikidata_as_the_source_for_the_external_link
]]
local function external_link_id (options)
local url_string = options.id;
local ext_link;
local this_wiki_code = cfg.this_wiki_code; -- Wikipedia subdomain; 'en' for en.wikipedia.org
local wd_article; -- article title from Wikidata
if options.encode == true or options.encode == nil then
url_string = mw.uri.encode( url_string );
end
if options.auto_link and is_set (options.access) then
auto_link_urls[options.auto_link] = table.concat ({options.prefix, url_string, options.suffix});
end
ext_link = mw.ustring.format ('[%s%s%s %s]', options.prefix, url_string, options.suffix or "", mw.text.nowiki(options.id));
if is_set(options.access) then
ext_link = substitute (cfg.presentation['ext-link-access-signal'], {cfg.presentation[options.access].class, cfg.presentation[options.access].title, ext_link}); -- add the free-to-read / paywall lock
end
return table.concat ({
make_wikilink (link_label_make (options), options.label), -- redirect, Wikidata link, or locally specified link (in that order)
options.separator or ' ',
ext_link
});
end
--[[--------------------------< I N T E R N A L _ L I N K _ I D >----------------------------------------------
Formats a wiki-style internal link
local function internal_link_id(options)
local id = mw.ustring.gsub (options.id, '%d', cfg.date_names.local_digits); -- translate 'local' digits to Western 0-9
return table.concat (
{
make_wikilink (link_label_make (options), options.label), -- wiki-link the identifier label
options.separator or ' ', -- add the separator
make_wikilink (
table.concat (
{
options.prefix,
id, -- translated to Western digits
options.suffix or ''
}),
substitute (cfg.presentation['bdi'], {'', mw.text.nowiki (options.id)}) -- bdi tags to prevent Latin script identifiers from being reversed at RTL language wikis
); -- nowiki because MediaWiki still has magic links for ISBN and the like; TODO: is it really required?
});
end
]]
--[[--------------------------< I S _ E M B A R G O E D >------------------------------------------------------
Determines if a PMC identifier's online version is embargoed. Compares the date in |pmc-embargo-date= against today's date. If embargo date is
in the future, returns the content of |pmc-embargo-date=; otherwise, returns an empty string because the embargo has expired or because
|pmc-embargo-date= was not set in this cite.
]]
local function is_embargoed (embargo)
if is_set (embargo) then
local lang = mw.getContentLanguage();
local good1, embargo_date, todays_date;
good1, embargo_date = pcall (lang.formatDate, lang, 'U', embargo);
todays_date = lang:formatDate ('U');
if good1 then -- if embargo date is a good date
if tonumber (embargo_date) >= tonumber (todays_date) then -- is embargo date is in the future?
return embargo; -- still embargoed
else
set_message ('maint_pmc_embargo'); -- embargo has expired; add main cat
return ''; -- unset because embargo has expired
end
end
end
return ''; -- |pmc-embargo-date= not set return empty string
end
--[=[-------------------------< I S _ V A L I D _ B I O R X I V _ D A T E >------------------------------------
returns true if:
2019-12-11T00:00Z <= biorxiv_date < today + 2 days
The dated form of biorxiv identifier has a start date of 2019-12-11. The Unix timestamp for that date is {{#time:U|2019-12-11}} = 1576022400
biorxiv_date is the date provided in those |biorxiv= parameter values that are dated at time 00:00:00 UTC
today is the current date at time 00:00:00 UTC plus 48 hours
if today is 2015-01-01T00:00:00 then
adding 24 hours gives 2015-01-02T00:00:00 – one second more than today
adding 24 hours gives 2015-01-03T00:00:00 – one second more than tomorrow
This function does not work if it is fed month names for languages other than English. Wikimedia #time: parser
apparently doesn't understand non-English date month names. This function will always return false when the date
contains a non-English month name because good1 is false after the call to lang.formatDate(). To get around that
call this function with YYYY-MM-DD format dates.
]=]
local function is_valid_biorxiv_date (biorxiv_date)
local good1, good2;
local biorxiv_ts, tomorrow_ts; -- to hold Unix timestamps representing the dates
local lang_object = mw.getContentLanguage();
good1, biorxiv_ts = pcall (lang_object.formatDate, lang_object, 'U', biorxiv_date ); -- convert biorxiv_date value to Unix timestamp
good2, tomorrow_ts = pcall (lang_object.formatDate, lang_object, 'U', 'today + 2 days' ); -- today midnight + 2 days is one second more than all day tomorrow
if good1 and good2 then -- lang.formatDate() returns a timestamp in the local script which tonumber() may not understand
biorxiv_ts = tonumber (biorxiv_ts) or lang_object:parseFormattedNumber (biorxiv_ts); -- convert to numbers for the comparison;
tomorrow_ts = tonumber (tomorrow_ts) or lang_object:parseFormattedNumber (tomorrow_ts);
else
return false; -- one or both failed to convert to Unix timestamp
end
return ((1576022400 <= biorxiv_ts) and (biorxiv_ts < tomorrow_ts)) -- 2012-12-11T00:00Z <= biorxiv_date < tomorrow's date
end
--[[--------------------------< IS _ V A L I D _ I S X N >-----------------------------------------------------
ISBN-10 and ISSN validator code calculates checksum across all ISBN/ISSN digits including the check digit.
ISBN-13 is checked in isbn().
If the number is valid the result will be 0. Before calling this function, ISBN/ISSN must be checked for length
and stripped of dashes, spaces and other non-ISxN characters.
]]
local function is_valid_isxn (isxn_str, len)
local temp = 0;
isxn_str = { isxn_str:byte(1, len) }; -- make a table of byte values '0' → 0x30 .. '9' → 0x39, 'X' → 0x58
len = len + 1; -- adjust to be a loop counter
for i, v in ipairs( isxn_str ) do -- loop through all of the bytes and calculate the checksum
if v == string.byte( "X" ) then -- if checkdigit is X (compares the byte value of 'X' which is 0x58)
temp = temp + 10*( len - i ); -- it represents 10 decimal
else
temp = temp + tonumber( string.char(v) )*(len-i);
end
end
return temp % 11 == 0; -- returns true if calculation result is zero
end
--[[--------------------------< IS _ V A L I D _ I S X N _ 1 3 >-----------------------------------------------
ISBN-13 and ISMN validator code calculates checksum across all 13 ISBN/ISMN digits including the check digit.
If the number is valid, the result will be 0. Before calling this function, ISBN-13/ISMN must be checked for length
and stripped of dashes, spaces and other non-ISxN-13 characters.
]]
local function is_valid_isxn_13 (isxn_str)
local temp=0;
isxn_str = { isxn_str:byte(1, 13) }; -- make a table of byte values '0' → 0x30 .. '9' → 0x39
for i, v in ipairs( isxn_str ) do
temp = temp + (3 - 2*(i % 2)) * tonumber( string.char(v) ); -- multiply odd index digits by 1, even index digits by 3 and sum; includes check digit
end
return temp % 10 == 0; -- sum modulo 10 is zero when ISBN-13/ISMN is correct
end
--[[--------------------------< N O R M A L I Z E _ L C C N >--------------------------------------------------
LCCN normalization (http://www.loc.gov/marc/lccn-namespace.html#normalization)
1. Remove all blanks.
2. If there is a forward slash (/) in the string, remove it, and remove all characters to the right of the forward slash.
3. If there is a hyphen in the string:
a. Remove it.
b. Inspect the substring following (to the right of) the (removed) hyphen. Then (and assuming that steps 1 and 2 have been carried out):
1. All these characters should be digits, and there should be six or less. (not done in this function)
2. If the length of the substring is less than 6, left-fill the substring with zeroes until the length is six.
Returns a normalized LCCN for lccn() to validate. There is no error checking (step 3.b.1) performed in this function.
]]
local function normalize_lccn (lccn)
lccn = lccn:gsub ("%s", ""); -- 1. strip whitespace
if nil ~= string.find (lccn, '/') then
lccn = lccn:match ("(.-)/"); -- 2. remove forward slash and all character to the right of it
end
local prefix
local suffix
prefix, suffix = lccn:match ("(.+)%-(.+)"); -- 3.a remove hyphen by splitting the string into prefix and suffix
if nil ~= suffix then -- if there was a hyphen
suffix = string.rep("0", 6-string.len (suffix)) .. suffix; -- 3.b.2 left fill the suffix with 0s if suffix length less than 6
lccn = prefix..suffix; -- reassemble the LCCN
end
return lccn;
end
--============================<< I D E N T I F I E R F U N C T I O N S >>====================================
--[[--------------------------< A R X I V >--------------------------------------------------------------------
See: http://arxiv.org/help/arxiv_identifier
format and error check arXiv identifier. There are three valid forms of the identifier:
the first form, valid only between date codes 9107 and 0703, is:
arXiv:<archive>.<class>/<date code><number><version>
where:
<archive> is a string of alpha characters - may be hyphenated; no other punctuation
<class> is a string of alpha characters - may be hyphenated; no other punctuation; not the same as |class= parameter which is not supported in this form
<date code> is four digits in the form YYMM where YY is the last two digits of the four-digit year and MM is the month number January = 01
first digit of YY for this form can only 9 and 0
<number> is a three-digit number
<version> is a 1 or more digit number preceded with a lowercase v; no spaces (undocumented)
the second form, valid from April 2007 through December 2014 is:
arXiv:<date code>.<number><version>
where:
<date code> is four digits in the form YYMM where YY is the last two digits of the four-digit year and MM is the month number January = 01
<number> is a four-digit number
<version> is a 1 or more digit number preceded with a lowercase v; no spaces
the third form, valid from January 2015 is:
arXiv:<date code>.<number><version>
where:
<date code> and <version> are as defined for 0704-1412
<number> is a five-digit number
]]
local function arxiv (id, class)
local handler = cfg.id_handlers['ARXIV'];
local year, month, version;
local err_cat = false; -- assume no error message
local text; -- output text
if id:match("^%a[%a%.%-]+/[90]%d[01]%d%d%d%d$") or id:match("^%a[%a%.%-]+/[90]%d[01]%d%d%d%dv%d+$") then -- test for the 9107-0703 format with or without version
year, month = id:match("^%a[%a%.%-]+/([90]%d)([01]%d)%d%d%d[v%d]*$");
year = tonumber(year);
month = tonumber(month);
if ((not (90 < year or 8 > year)) or (1 > month or 12 < month)) or -- if invalid year or invalid month
((91 == year and 7 > month) or (7 == year and 3 < month)) then -- if years ok, are starting and ending months ok?
err_cat = true; -- flag for error message
end
elseif id:match("^%d%d[01]%d%.%d%d%d%d$") or id:match("^%d%d[01]%d%.%d%d%d%dv%d+$") then -- test for the 0704-1412 with or without version
year, month = id:match("^(%d%d)([01]%d)%.%d%d%d%d[v%d]*$");
year = tonumber(year);
month = tonumber(month);
if ((7 > year) or (14 < year) or (1 > month or 12 < month)) or -- is year invalid or is month invalid? (doesn't test for future years)
((7 == year) and (4 > month)) then -- when year is 07, is month invalid (before April)?
err_cat = true; -- flag for error message
end
elseif id:match("^%d%d[01]%d%.%d%d%d%d%d$") or id:match("^%d%d[01]%d%.%d%d%d%d%dv%d+$") then -- test for the 1501- format with or without version
year, month = id:match("^(%d%d)([01]%d)%.%d%d%d%d%d[v%d]*$");
year = tonumber(year);
month = tonumber(month);
if ((15 > year) or (1 > month or 12 < month)) then -- is year invalid or is month invalid? (doesn't test for future years)
err_cat = true; -- flag for error message
end
else
err_cat = true; -- not a recognized format; flag for error message
end
err_cat = err_cat and table.concat ({' ', set_message ('err_bad_arxiv')}) or ''; -- set error message if flag is true
text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode, access = handler.access}) .. err_cat;
if is_set (class) then
if id:match ('^%d+') then
text = table.concat ({text, ' [[//arxiv.org/archive/', class, ' ', class, ']]'}); -- external link within square brackets, not wikilink
else
text = table.concat ({text, ' ', set_message ('err_class_ignored')});
end
end
return text;
end
--[[--------------------------< B I B C O D E >--------------------------------------------------------------------
Validates (sort of) and formats a bibcode ID.
Format for bibcodes is specified here: http://adsabs.harvard.edu/abs_doc/help_pages/data.html#bibcodes
But, this: 2015arXiv151206696F is apparently valid so apparently, the only things that really matter are length, 19 characters
and first four digits must be a year. This function makes these tests:
length must be 19 characters
characters in position
1–4 must be digits and must represent a year in the range of 1000 – next year
5 must be a letter
6–8 must be letter, digit, ampersand, or dot (ampersand cannot directly precede a dot; &. )
9–18 must be letter, digit, or dot
19 must be a letter or dot
]]
local function bibcode (id, access)
local handler = cfg.id_handlers['BIBCODE'];
local err_type;
local year;
local text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode,
access = access});
if 19 ~= id:len() then
err_type = cfg.err_msg_supl.length;
else
year = id:match ("^(%d%d%d%d)[%a][%w&%.][%w&%.][%w&%.][%w.]+[%a%.]$");
if not year then -- if nil then no pattern match
err_type = cfg.err_msg_supl.value; -- so value error
else
local next_year = tonumber(os.date ('%Y')) + 1; -- get the current year as a number and add one for next year
year = tonumber (year); -- convert year portion of bibcode to a number
if (1000 > year) or (year > next_year) then
err_type = cfg.err_msg_supl.year; -- year out of bounds
end
if id:find('&%.') then
err_type = cfg.err_msg_supl.journal; -- journal abbreviation must not have '&.' (if it does it's missing a letter)
end
end
end
if is_set (err_type) then -- if there was an error detected
text = text .. ' ' .. set_message( 'err_bad_bibcode', {err_type});
end
return text;
end
--[[--------------------------< B I O R X I V >-----------------------------------------------------------------
Format bioRxiv ID and do simple error checking. Before 2019-12-11, biorXiv IDs were 10.1101/ followed by exactly
6 digits. After 2019-12-11, biorXiv IDs retained the six-digit identifier but prefixed that with a yyyy.mm.dd.
date and suffixed with an optional version identifier.
The bioRxiv ID is the string of characters:
https://doi.org/10.1101/078733 -> 10.1101/078733
or a date followed by a six-digit number followed by an optional version indicator 'v' and one or more digits:
https://www.biorxiv.org/content/10.1101/2019.12.11.123456v2 -> 10.1101/2019.12.11.123456v2
see https://www.biorxiv.org/about-biorxiv
]]
local function biorxiv(id)
local handler = cfg.id_handlers['BIORXIV'];
local err_cat = true; -- flag; assume that there will be an error
local patterns = {
'^10.1101/%d%d%d%d%d%d$', -- simple 6-digit identifier (before 2019-12-11)
'^10.1101/(20[1-9]%d)%.([01]%d)%.([0-3]%d)%.%d%d%d%d%d%dv%d+$', -- y.m.d. date + 6-digit identifier + version (after 2019-12-11)
'^10.1101/(20[1-9]%d)%.([01]%d)%.([0-3]%d)%.%d%d%d%d%d%d$', -- y.m.d. date + 6-digit identifier (after 2019-12-11)
}
for _, pattern in ipairs (patterns) do -- spin through the patterns looking for a match
if id:match (pattern) then
local y, m, d = id:match (pattern); -- found a match, attempt to get year, month and date from the identifier
if m then -- m is nil when id is the six-digit form
if not is_valid_biorxiv_date (y .. '-' .. m .. '-' .. d) then -- validate the encoded date; TODO: don't ignore leap-year and actual month lengths ({{#time:}} is a poor date validator)
break; -- date fail; break out early so we don't unset the error message
end
end
err_cat = nil; -- we found a match so unset the error message
break; -- and done
end
end -- err_cat remains set here when no match
return external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
prefix = handler.prefix, id = id, separator = handler.separator,
encode = handler.encode, access = handler.access}) .. (err_cat and (' ' .. set_message( 'err_bad_biorxiv')) or '');
end
--[[--------------------------< C I T E S E E R X >------------------------------------------------------------
CiteSeerX use their own notion of "doi" (not to be confused with the identifiers resolved via doi.org).
The description of the structure of this identifier can be found at Help_talk:Citation_Style_1/Archive_26#CiteSeerX_id_structure
]]
local function citeseerx (id)
local handler = cfg.id_handlers['CITESEERX'];
local matched;
local text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode,
access = handler.access});
matched = id:match ("^10%.1%.1%.[1-9]%d?%d?%d?%.[1-9]%d?%d?%d?$");
if not matched then
text = text .. ' ' .. set_message( 'err_bad_citeseerx' );
end
return text;
end
--[[--------------------------< D O I >------------------------------------------------------------------------
Formats a DOI and checks for DOI errors.
DOI names contain two parts: prefix and suffix separated by a forward slash.
Prefix: directory indicator '10.' followed by a registrant code
Suffix: character string of any length chosen by the registrant
This function checks a DOI name for: prefix/suffix. If the DOI name contains spaces or endashes, or, if it ends
with a period or a comma, this function will emit a bad_doi error message.
DOI names are case-insensitive and can incorporate any printable Unicode characters so the test for spaces, endash,
and terminal punctuation may not be technically correct but it appears, that in practice these characters are rarely
if ever used in DOI names.
]]
local function doi (id, inactive, access, ignore_invalid)
local err_cat;
local handler = cfg.id_handlers['DOI'];
local text;
if is_set (inactive) then
local inactive_year = inactive:match("%d%d%d%d") or ''; -- try to get the year portion from the inactive date
local inactive_month, good;
if is_set (inactive_year) then
if 4 < inactive:len() then -- inactive date has more than just a year (could be anything)
local lang_obj = mw.getContentLanguage(); -- get a language object for this wiki
good, inactive_month = pcall (lang_obj.formatDate, lang_obj, 'F', inactive); -- try to get the month name from the inactive date
if not good then
inactive_month = nil; -- something went wrong so make sure this is unset
end
end
else
inactive_year = nil; -- |doi-broken-date= has something but it isn't a date
end
if is_set(inactive_year) and is_set (inactive_month) then
set_message ('maint_doi_inactive_dated', {inactive_year, inactive_month, ' '});
elseif is_set(inactive_year) then
set_message ('maint_doi_inactive_dated', {inactive_year, '', ''});
else
set_message ('maint_doi_inactive');
end
inactive = " (" .. cfg.messages['inactive'] .. ' ' .. inactive .. ')';
end
local registrant = id:match ('^10%.([^/]+)/[^%s–]-[^%.,]$'); -- registrant set when DOI has the proper basic form
local registrant_err_patterns = { -- these patterns are for code ranges that are not supported
'^[^1-3]%d%d%d%d%.%d%d*$', -- 5 digits with subcode (0xxxx, 40000+); accepts: 10000–39999
'^[^1-4]%d%d%d%d$', -- 5 digits without subcode (0xxxx, 40000+); accepts: 10000–49999
'^[^1-9]%d%d%d%.%d%d*$', -- 4 digits with subcode (0xxx); accepts: 1000–9999
'^[^1-9]%d%d%d$', -- 4 digits without subcode (0xxx); accepts: 1000–9999
'^%d%d%d%d%d%d+', -- 6 or more digits
'^%d%d?%d?$', -- less than 4 digits without subcode (with subcode is legitimate)
'^5555$', -- test registrant will never resolve
'%s', -- any space character in registrant
}
if not ignore_invalid then
if registrant then -- when DOI has proper form
for i, pattern in ipairs (registrant_err_patterns) do -- spin through error patterns
if registrant:match (pattern) then -- to validate registrant codes
err_cat = ' ' .. set_message ('err_bad_doi'); -- when found, mark this DOI as bad
break; -- and done
end
end
else
err_cat = ' ' .. set_message ('err_bad_doi'); -- invalid directory or malformed
end
else
set_message ('maint_doi_ignore');
end
text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode, access = access,
auto_link = not (err_cat or is_set (inactive) or ignore_invalid) and 'doi' or nil -- do not auto-link when |doi-broken-date= has a value or when there is a DOI error or (to play it safe, after all, auto-linking is not essential) when invalid DOIs are ignored
}) .. (inactive or '');
return text .. (err_cat and err_cat or ''); -- parentheses required
end
--[[--------------------------< H D L >------------------------------------------------------------------------
Formats an HDL with minor error checking.
HDL names contain two parts: prefix and suffix separated by a forward slash.
Prefix: character string using any character in the UCS-2 character set except '/'
Suffix: character string of any length using any character in the UCS-2 character set chosen by the registrant
This function checks a HDL name for: prefix/suffix. If the HDL name contains spaces, endashes, or, if it ends
with a period or a comma, this function will emit a bad_hdl error message.
HDL names are case-insensitive and can incorporate any printable Unicode characters so the test for endashes and
terminal punctuation may not be technically correct but it appears, that in practice these characters are rarely
if ever used in HDLs.
Query string parameters are named here: http://www.handle.net/proxy_servlet.html. query strings are not displayed
but since '?' is an allowed character in an HDL, '?' followed by one of the query parameters is the only way we
have to detect the query string so that it isn't URL-encoded with the rest of the identifier.
]]
local function hdl(id, access)
local handler = cfg.id_handlers['HDL'];
local query_params = { -- list of known query parameters from http://www.handle.net/proxy_servlet.html
'noredirect',
'ignore_aliases',
'auth',
'cert',
'index',
'type',
'urlappend',
'locatt',
'action',
}
local hdl, suffix, param = id:match ('(.-)(%?(%a+).+)$'); -- look for query string
local found;
if hdl then -- when there are query strings, this is the handle identifier portion
for _, q in ipairs (query_params) do -- spin through the list of query parameters
if param:match ('^' .. q) then -- if the query string begins with one of the parameters
found = true; -- announce a find
break; -- and stop looking
end
end
end
if found then
id = hdl; -- found so replace id with the handle portion; this will be URL-encoded, suffix will not
else
suffix = ''; -- make sure suffix is empty string for concatenation else
end
local text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
prefix = handler.prefix, id = id, suffix = suffix, separator = handler.separator, encode = handler.encode, access = access})
if nil == id:match("^[^%s–]-/[^%s–]-[^%.,]$") then -- HDL must contain a forward slash, must not contain spaces, endashes, and must not end with period or comma
text = text .. ' ' .. set_message( 'err_bad_hdl' );
end
return text;
end
--[[--------------------------< I S B N >----------------------------------------------------------------------
Determines whether an ISBN string is valid
]]
local function isbn (isbn_str, ignore_invalid)
local handler = cfg.id_handlers['ISBN'];
local function return_result (check, err_type) -- local function to handle the various returns
if ignore_invalid then -- if ignoring ISBN errors
set_message ('maint_isbn_ignore'); -- add a maint category even when there is no error
else -- here when not ignoring
if not check then -- and there is an error
return ISBN .. set_message ('err_bad_isbn', {err_type}, false, ' '); -- display an error message
end
end
return ISBN;
end
if nil ~= isbn_str:match ('[^%s-0-9X]') then
return return_result (false, cfg.err_msg_supl.char); -- fail if isbn_str contains anything but digits, hyphens, or the uppercase X
end
local id = isbn_str:gsub ('[%s-]', ''); -- remove hyphens and whitespace
local len = id:len();
if len ~= 10 and len ~= 13 then
return return_result (false, cfg.err_msg_supl.length); -- fail if incorrect length
end
if len == 10 then
if id:match ('^%d*X?$') == nil then -- fail if isbn_str has 'X' anywhere but last position
return return_result (false, cfg.err_msg_supl.form);
end
return return_result (is_valid_isxn(id, 10), cfg.err_msg_supl.check);
else
if id:match ('^%d+$') == nil then
return return_result (false, cfg.err_msg_supl.char); -- fail if ISBN-13 is not all digits
end
if id:match ('^97[89]%d*$') == nil then
return return_result (false, cfg.err_msg_supl.prefix); -- fail when ISBN-13 does not begin with 978 or 979
end
if id:match ('^9790') then
return return_result (false, cfg.err_msg_supl.group); -- group identifier '0' is reserved to ISMN
end
return return_result (is_valid_isxn_13 (id), cfg.err_msg_supl.check);
end
end
--[[--------------------------< A S I N >----------------------------------------------------------------------
Formats a link to Amazon. Do simple error checking: ASIN must be mix of 10 numeric or uppercase alpha
characters. If a mix, first character must be uppercase alpha; if all numeric, ASINs must be 10-digit
ISBN. If 10-digit ISBN, add a maintenance category so a bot or AWB script can replace |asin= with |isbn=.
Error message if not 10 characters, if not ISBN-10, if mixed and first character is a digit.
|asin=630....... is (apparently) not a legitimate ISBN though it checksums as one; these do not cause this
function to emit the maint_asin message
This function is positioned here because it calls isbn()
]]
local function asin (id, domain)
local err_cat = ""
if not id:match("^[%d%u][%d%u][%d%u][%d%u][%d%u][%d%u][%d%u][%d%u][%d%u][%d%u]$") then
err_cat = ' ' .. set_message ('err_bad_asin'); -- ASIN is not a mix of 10 uppercase alpha and numeric characters
else
if id:match("^%d%d%d%d%d%d%d%d%d[%dX]$") then -- if 10-digit numeric (or 9 digits with terminal X)
if isbn (id) then -- see if ASIN value is or validates as ISBN-10
if not id:find ('^630') then -- 630xxxxxxx is (apparently) not a valid isbn prefix but is used by amazon as a numeric identifier
set_message ('maint_asin'); -- begins with something other than 630 so possibly an isbn
end
elseif not is_set (err_cat) then
err_cat = ' ' .. set_message ('err_bad_asin'); -- ASIN is not ISBN-10
end
elseif not id:match("^%u[%d%u]+$") then
err_cat = ' ' .. set_message ('err_bad_asin'); -- asin doesn't begin with uppercase alpha
end
end
if not is_set(domain) then
domain = "com";
elseif in_array (domain, {'jp', 'uk'}) then -- Japan, United Kingdom
domain = "co." .. domain;
elseif in_array (domain, {'au', 'br', 'mx'}) then -- Australia, Brazil, Mexico
domain = "com." .. domain;
end
local handler = cfg.id_handlers['ASIN'];
return external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
prefix = handler.prefix .. domain .. "/dp/",
id = id, encode = handler.encode, separator = handler.separator}) .. err_cat;
end
--[[--------------------------< I S M N >----------------------------------------------------------------------
Determines whether an ISMN string is valid. Similar to ISBN-13, ISMN is 13 digits beginning 979-0-... and uses the
same check digit calculations. See http://www.ismn-international.org/download/Web_ISMN_Users_Manual_2008-6.pdf
section 2, pages 9–12.
]]
local function ismn (id)
local handler = cfg.id_handlers['ISMN'];
local text;
local valid_ismn = true;
local id_copy;
id_copy = id; -- save a copy because this testing is destructive
id = id:gsub ('[%s-]', ''); -- remove hyphens and white space
if 13 ~= id:len() or id:match( "^9790%d*$" ) == nil then -- ISMN must be 13 digits and begin with 9790
valid_ismn = false;
else
valid_ismn=is_valid_isxn_13 (id); -- validate ISMN
end
-- text = internal_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect, -- use this (or external version) when there is some place to link to
-- prefix = handler.prefix, id = id_copy, separator = handler.separator, encode = handler.encode})
text = table.concat ( -- because no place to link to yet
{
make_wikilink (link_label_make (handler), handler.label),
handler.separator,
id_copy
});
if false == valid_ismn then
text = text .. ' ' .. set_message( 'err_bad_ismn' ) -- add an error message if the ISMN is invalid
end
return text;
end
--[[--------------------------< I S S N >----------------------------------------------------------------------
Validate and format an ISSN. This code fixes the case where an editor has included an ISSN in the citation but
has separated the two groups of four digits with a space. When that condition occurred, the resulting link looked
like this:
|issn=0819 4327 gives: [http://www.worldcat.org/issn/0819 4327 0819 4327] -- can't have spaces in an external link
This code now prevents that by inserting a hyphen at the ISSN midpoint. It also validates the ISSN for length
and makes sure that the checkdigit agrees with the calculated value. Incorrect length (8 digits), characters
other than 0-9 and X, or checkdigit / calculated value mismatch will all cause a check ISSN error message. The
ISSN is always displayed with a hyphen, even if the ISSN was given as a single group of 8 digits.
]]
local function issn (id, e, ignore_invalid)
local issn_copy = id; -- save a copy of unadulterated ISSN; use this version for display if ISSN does not validate
local handler;
local text;
local valid_issn = true;
handler = cfg.id_handlers[e and 'EISSN' or 'ISSN'];
id = id:gsub ('[%s-]', ''); -- remove hyphens and whitespace
if 8 ~= id:len() or nil == id:match( "^%d*X?$" ) then -- validate the ISSN: 8 digits long, containing only 0-9 or X in the last position
valid_issn = false; -- wrong length or improper character
else
valid_issn = is_valid_isxn(id, 8); -- validate ISSN
end
if true == valid_issn then
id = string.sub( id, 1, 4 ) .. "-" .. string.sub( id, 5 ); -- if valid, display correctly formatted version
else
id = issn_copy; -- if not valid, show the invalid ISSN with error message
end
text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode})
if ignore_invalid then
set_message ('maint_issn_ignore');
else
if false == valid_issn then
text = text .. ' ' .. set_message ('err_bad_issn', e and 'e' or ''); -- add an error message if the ISSN is invalid
end
end
return text
end
--[[--------------------------< J F M >-----------------------------------------------------------------------
A numerical identifier in the form nn.nnnn.nn
]]
local function jfm (id)
local handler = cfg.id_handlers['JFM'];
local id_num;
local err_cat = '';
id_num = id:match ('^[Jj][Ff][Mm](.*)$'); -- identifier with jfm prefix; extract identifier
if is_set (id_num) then
set_message ('maint_jfm_format');
else -- plain number without mr prefix
id_num = id; -- if here id does not have prefix
end
if id_num and id_num:match('^%d%d%.%d%d%d%d%.%d%d$') then
id = id_num; -- jfm matches pattern
else
err_cat = ' ' .. set_message( 'err_bad_jfm' ); -- set an error message
end
return external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode}) .. err_cat;
end
--[[--------------------------< L C C N >----------------------------------------------------------------------
Format LCCN link and do simple error checking. LCCN is a character string 8-12 characters long. The length of
the LCCN dictates the character type of the first 1-3 characters; the rightmost eight are always digits.
http://info-uri.info/registry/OAIHandler?verb=GetRecord&metadataPrefix=reg&identifier=info:lccn/
length = 8 then all digits
length = 9 then lccn[1] is lowercase alpha
length = 10 then lccn[1] and lccn[2] are both lowercase alpha or both digits
length = 11 then lccn[1] is lower case alpha, lccn[2] and lccn[3] are both lowercase alpha or both digits
length = 12 then lccn[1] and lccn[2] are both lowercase alpha
]]
local function lccn(lccn)
local handler = cfg.id_handlers['LCCN'];
local err_cat = ''; -- presume that LCCN is valid
local id = lccn; -- local copy of the LCCN
id = normalize_lccn (id); -- get canonical form (no whitespace, hyphens, forward slashes)
local len = id:len(); -- get the length of the LCCN
if 8 == len then
if id:match("[^%d]") then -- if LCCN has anything but digits (nil if only digits)
err_cat = ' ' .. set_message ('err_bad_lccn'); -- set an error message
end
elseif 9 == len then -- LCCN should be adddddddd
if nil == id:match("%l%d%d%d%d%d%d%d%d") then -- does it match our pattern?
err_cat = ' ' .. set_message ('err_bad_lccn'); -- set an error message
end
elseif 10 == len then -- LCCN should be aadddddddd or dddddddddd
if id:match("[^%d]") then -- if LCCN has anything but digits (nil if only digits) ...
if nil == id:match("^%l%l%d%d%d%d%d%d%d%d") then -- ... see if it matches our pattern
err_cat = ' ' .. set_message ('err_bad_lccn'); -- no match, set an error message
end
end
elseif 11 == len then -- LCCN should be aaadddddddd or adddddddddd
if not (id:match("^%l%l%l%d%d%d%d%d%d%d%d") or id:match("^%l%d%d%d%d%d%d%d%d%d%d")) then -- see if it matches one of our patterns
err_cat = ' ' .. set_message ('err_bad_lccn'); -- no match, set an error message
end
elseif 12 == len then -- LCCN should be aadddddddddd
if not id:match("^%l%l%d%d%d%d%d%d%d%d%d%d") then -- see if it matches our pattern
err_cat = ' ' .. set_message ('err_bad_lccn'); -- no match, set an error message
end
else
err_cat = ' ' .. set_message ('err_bad_lccn'); -- wrong length, set an error message
end
if not is_set (err_cat) and nil ~= lccn:find ('%s') then
err_cat = ' ' .. set_message ('err_bad_lccn'); -- lccn contains a space, set an error message
end
return external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
prefix = handler.prefix, id = lccn, separator = handler.separator, encode = handler.encode}) .. err_cat;
end
--[[--------------------------< M R >--------------------------------------------------------------------------
A seven digit number; if not seven digits, zero-fill leading digits to make seven digits.
]]
local function mr (id)
local handler = cfg.id_handlers['MR'];
local id_num;
local id_len;
local err_cat = '';
id_num = id:match ('^[Mm][Rr](%d+)$'); -- identifier with mr prefix
if is_set (id_num) then
set_message ('maint_mr_format'); -- add maint cat
else -- plain number without mr prefix
id_num = id:match ('^%d+$'); -- if here id is all digits
end
id_len = id_num and id_num:len() or 0;
if (7 >= id_len) and (0 ~= id_len) then
id = string.rep ('0', 7-id_len ) .. id_num; -- zero-fill leading digits
else
err_cat = ' ' .. set_message ('err_bad_mr'); -- set an error message
end
return external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode}) .. err_cat;
end
--[[--------------------------< O C L C >----------------------------------------------------------------------
Validate and format an OCLC ID. https://www.oclc.org/batchload/controlnumber.en.html {{dead link}}
archived at: https://web.archive.org/web/20161228233804/https://www.oclc.org/batchload/controlnumber.en.html
]]
local function oclc (id)
local handler = cfg.id_handlers['OCLC'];
local number;
local err_msg = ''; -- empty string for concatenation
if id:match('^ocm%d%d%d%d%d%d%d%d$') then -- ocm prefix and 8 digits; 001 field (12 characters)
number = id:match('ocm(%d+)'); -- get the number
elseif id:match('^ocn%d%d%d%d%d%d%d%d%d$') then -- ocn prefix and 9 digits; 001 field (12 characters)
number = id:match('ocn(%d+)'); -- get the number
elseif id:match('^on%d%d%d%d%d%d%d%d%d%d+$') then -- on prefix and 10 or more digits; 001 field (12 characters)
number = id:match('^on(%d%d%d%d%d%d%d%d%d%d+)$'); -- get the number
elseif id:match('^%(OCoLC%)[1-9]%d*$') then -- (OCoLC) prefix and variable number digits; no leading zeros; 035 field
number = id:match('%(OCoLC%)([1-9]%d*)'); -- get the number
if 9 < number:len() then
number = nil; -- constrain to 1 to 9 digits; change this when OCLC issues 10-digit numbers
end
elseif id:match('^%d+$') then -- no prefix
number = id; -- get the number
if 10 < number:len() then
number = nil; -- constrain to 1 to 10 digits; change this when OCLC issues 11-digit numbers
end
end
if number then -- proper format
id = number; -- exclude prefix, if any, from external link
else
err_msg = ' ' .. set_message ('err_bad_oclc') -- add an error message if the id is malformed
end
local text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode}) .. err_msg;
return text;
end
--[[--------------------------< O P E N L I B R A R Y >--------------------------------------------------------
Formats an OpenLibrary link, and checks for associated errors.
]]
local function openlibrary(id, access)
local handler = cfg.id_handlers['OL'];
local ident, code = id:gsub('^OL', ''):match("^(%d+([AMW]))$"); -- strip optional OL prefix followed immediately by digits followed by 'A', 'M', or 'W';
local error_msg = '';
local prefix = { -- these are appended to the handler.prefix according to code
['A']='authors/OL',
['M']='books/OL',
['W']='works/OL',
['X']='OL' -- not a code; spoof when 'code' in id is invalid
};
if not ident then
code = 'X'; -- no code or id completely invalid
ident = id; -- copy id to ident so that we display the flawed identifier
error_msg = ' ' .. set_message ('err_bad_ol');
end
return external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
prefix = handler.prefix .. prefix[code],
id = ident, separator = handler.separator, encode = handler.encode,
access = access}) .. error_msg;
end
--[[--------------------------< P M C >------------------------------------------------------------------------
Format a PMC, do simple error checking, and check for embargoed articles.
The embargo parameter takes a date for a value. If the embargo date is in the future the PMC identifier will not
be linked to the article. If the embargo date is today or in the past, or if it is empty or omitted, then the
PMC identifier is linked to the article through the link at cfg.id_handlers['PMC'].prefix.
PMC embargo date testing is done in function is_embargoed () which is called earlier because when the citation
has |pmc=<value> but does not have a |url= then |title= is linked with the PMC link. Function is_embargoed ()
returns the embargo date if the PMC article is still embargoed, otherwise it returns an empty string.
PMCs are sequential numbers beginning at 1 and counting up. This code checks the PMC to see that it contains only digits and is less
than test_limit; the value in local variable test_limit will need to be updated periodically as more PMCs are issued.
]]
local function pmc (id, embargo)
local handler = cfg.id_handlers['PMC'];
local err_cat;
local id_num;
local text;
id_num = id:match ('^[Pp][Mm][Cc](%d+)$'); -- identifier with PMC prefix
if is_set (id_num) then
set_message ('maint_pmc_format');
else -- plain number without PMC prefix
id_num = id:match ('^%d+$'); -- if here id is all digits
end
if is_set (id_num) then -- id_num has a value so test it
id_num = tonumber(id_num); -- convert id_num to a number for range testing
if 1 > id_num or handler.id_limit < id_num then -- if PMC is outside test limit boundaries
err_cat = ' ' .. set_message ('err_bad_pmc'); -- set an error message
else
id = tostring (id_num); -- make sure id is a string
end
else -- when id format incorrect
err_cat = ' ' .. set_message ('err_bad_pmc'); -- set an error message
end
if is_set (embargo) and is_set (is_embargoed (embargo)) then -- is PMC is still embargoed?
text = table.concat ( -- still embargoed so no external link
{
make_wikilink (link_label_make (handler), handler.label),
handler.separator,
id,
(err_cat and err_cat or '') -- parens required
});
else
text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect, -- no embargo date or embargo has expired, ok to link to article
prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode, access = handler.access,
auto_link = not err_cat and 'pmc' or nil -- do not auto-link when PMC has error
}) .. (err_cat and err_cat or ''); -- parentheses required
end
return text;
end
--[[--------------------------< P M I D >----------------------------------------------------------------------
Format PMID and do simple error checking. PMIDs are sequential numbers beginning at 1 and counting up. This
code checks the PMID to see that it contains only digits and is less than test_limit; the value in local variable
test_limit will need to be updated periodically as more PMIDs are issued.
]]
local function pmid(id)
local handler = cfg.id_handlers['PMID'];
local err_cat = ''; -- presume that PMID is valid
if id:match("[^%d]") then -- if PMID has anything but digits
err_cat = ' ' .. set_message ('err_bad_pmid'); -- set an error message
else -- PMID is only digits
local id_num = tonumber(id); -- convert id to a number for range testing
if 1 > id_num or handler.id_limit < id_num then -- if PMID is outside test limit boundaries
err_cat = ' ' .. set_message ('err_bad_pmid'); -- set an error message
end
end
return external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode}) .. err_cat;
end
--[[--------------------------< S 2 C I D >--------------------------------------------------------------------
Format an S2CID, do simple error checking
S2CIDs are sequential numbers beginning at 1 and counting up. This code checks the S2CID to see that it is only
digits and is less than test_limit; the value in local variable test_limit will need to be updated periodically
as more S2CIDs are issued.
]]
local function s2cid (id, access)
local handler = cfg.id_handlers['S2CID'];
local err_cat = ''; -- presume that S2CID is valid
local id_num;
local text;
id_num = id:match ('^[1-9]%d*$'); -- id must be all digits; must not begin with 0; no open access flag
if is_set (id_num) then -- id_num has a value so test it
id_num = tonumber(id_num); -- convert id_num to a number for range testing
if handler.id_limit < id_num then -- if S2CID is outside test limit boundaries
err_cat = ' ' .. set_message ('bad_s2cid_err'); -- set an error message
end
else -- when id format incorrect
err_cat = ' ' .. set_message ('bad_s2cid_err'); -- set an error message
end
text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
prefix = handler.prefix, id = id:gsub ('%.%a%a', ''), separator = handler.separator, encode = handler.encode, access = access}) .. err_cat;
return text;
end
--[[--------------------------< S B N >------------------------------------------------------------------------
9-digit form of ISBN-10; uses same check-digit validation when SBN is prefixed with an additional '0' to make 10 digits
]]
local function sbn (id, ignore_invalid)
local handler = cfg.id_handlers['SBN'];
local function return_result (check, err_type) -- local function to handle the various returns
if not ignore_invalid then -- if not ignoring SBN errors
if not check then
return SBN .. set_message ('err_bad_sbn', {err_type}, false, ' '); -- display an error message
end
else
set_message ('maint_isbn_ignore'); -- add a maint category even when there is no error (ToDo: Possibly switch to separate message for SBNs only)
end
return SBN;
end
if id:match ('[^%s-0-9X]') then
return return_result (false, cfg.err_msg_supl.char); -- fail if SBN contains anything but digits, hyphens, or the uppercase X
end
local ident = id:gsub ('[%s-]', ''); -- remove hyphens and whitespace; they interfere with the rest of the tests
if 9 ~= ident:len() then
return return_result (false, cfg.err_msg_supl.length); -- fail if incorrect length
end
if ident:match ('^%d*X?$') == nil then
return return_result (false, cfg.err_msg_supl.form); -- fail if SBN has 'X' anywhere but last position
end
return return_result (is_valid_isxn ('0' .. ident, 10), cfg.err_msg_supl.check);
end
--[[--------------------------< S S R N >----------------------------------------------------------------------
Format an SSRN, do simple error checking
SSRNs are sequential numbers beginning at 100? and counting up. This code checks the SSRN to see that it is
only digits and is greater than 99 and less than test_limit; the value in local variable test_limit will need
to be updated periodically as more SSRNs are issued.
]]
local function ssrn (id)
local handler = cfg.id_handlers['SSRN'];
local err_cat = ''; -- presume that SSRN is valid
local id_num;
local text;
id_num = id:match ('^%d+$'); -- id must be all digits
if is_set (id_num) then -- id_num has a value so test it
id_num = tonumber(id_num); -- convert id_num to a number for range testing
if 100 > id_num or handler.id_limit < id_num then -- if SSRN is outside test limit boundaries
err_cat = ' ' .. set_message ('err_bad_ssrn'); -- set an error message
end
else -- when id format incorrect
err_cat = ' ' .. set_message ('err_bad_ssrn'); -- set an error message
end
text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode, access = handler.access}) .. err_cat;
return text;
end
--[[--------------------------< U S E N E T _ I D >------------------------------------------------------------
Validate and format a usenet message id. Simple error checking, looks for 'id-left@id-right' not enclosed in
'<' and/or '>' angle brackets.
]]
local function usenet_id (id)
local handler = cfg.id_handlers['USENETID'];
local text = external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode})
if not id:match('^.+@.+$') or not id:match('^[^<].*[^>]$') then -- doesn't have '@' or has one or first or last character is '< or '>'
text = text .. ' ' .. set_message ('err_bad_usenet_id') -- add an error message if the message id is invalid
end
return text
end
--[[--------------------------< Z B L >-----------------------------------------------------------------------
A numerical identifier in the form nnnn.nnnnn - leading zeros in the first quartet optional
format described here: http://emis.mi.sanu.ac.rs/ZMATH/zmath/en/help/search/
temporary format is apparently eight digits. Anything else is an error
]]
local function zbl (id)
local handler = cfg.id_handlers['ZBL'];
local err_cat = '';
if id:match('^%d%d%d%d%d%d%d%d$') then -- is this identifier using temporary format?
set_message ('maint_zbl'); -- yes, add maint cat
elseif not id:match('^%d?%d?%d?%d%.%d%d%d%d%d$') then -- not temporary, is it normal format?
err_cat = ' ' .. set_message ('err_bad_zbl'); -- no, set an error message
end
return external_link_id ({link = handler.link, label = handler.label, q = handler.q, redirect = handler.redirect,
prefix = handler.prefix, id = id, separator = handler.separator, encode = handler.encode}) .. err_cat;
end
--============================<< I N T E R F A C E F U N C T I O N S >>==========================================
--[[--------------------------< B U I L D _ I D _ L I S T >--------------------------------------------------------
Takes a table of IDs created by extract_ids() and turns it into a table of formatted ID outputs.
inputs:
id_list – table of identifiers built by extract_ids()
options – table of various template parameter values used to modify some manually handled identifiers
]]
local function build_id_list( id_list, options )
local new_list, handler = {};
local accept;
local function fallback(k) return { __index = function(t,i) return cfg.id_handlers[k][i] end } end;
for k, v in pairs( id_list ) do
v, accept = has_accept_as_written (v); -- remove and note accept-as-written markup if present
-- k is uppercase identifier name as index to cfg.id_handlers; e.g. cfg.id_handlers['ISBN'], v is a table
-- fallback to read-only cfg
handler = setmetatable( { ['id'] = v, ['access'] = options.IdAccessLevels[k] }, fallback(k) );
if handler.mode == 'external' then
table.insert( new_list, {handler.label, external_link_id( handler ) } );
elseif handler.mode ~= 'manual' then
error( cfg.messages['unknown_ID_mode'] );
elseif k == 'ARXIV' then
table.insert( new_list, {handler.label, arxiv( v, options.Class ) } );
elseif k == 'ASIN' then
table.insert( new_list, {handler.label, asin( v, options.ASINTLD ) } );
elseif k == 'BIBCODE' then
table.insert( new_list, {handler.label, bibcode( v, handler.access ) } );
elseif k == 'BIORXIV' then
table.insert( new_list, {handler.label, biorxiv( v ) } );
elseif k == 'CITESEERX' then
table.insert( new_list, {handler.label, citeseerx( v ) } );
elseif k == 'DOI' then
table.insert( new_list, {handler.label, doi( v, options.DoiBroken, handler.access, accept) } );
elseif k == 'EISSN' then
table.insert( new_list, {handler.label, issn( v, true, accept) } ); -- true distinguishes EISSN from ISSN
elseif k == 'HDL' then
table.insert( new_list, {handler.label, hdl( v, handler.access ) } );
elseif k == 'ISBN' then
table.insert( new_list, {handler.label, isbn (v, (accept or options.IgnoreISBN)) } );
elseif k == 'ISMN' then
table.insert( new_list, {handler.label, ismn( v ) } );
elseif k == 'ISSN' then
table.insert( new_list, {handler.label, issn( v, false, accept) } );
elseif k == 'JFM' then
table.insert( new_list, {handler.label, jfm( v ) } );
elseif k == 'LCCN' then
table.insert( new_list, {handler.label, lccn( v ) } );
elseif k == 'MR' then
table.insert( new_list, {handler.label, mr( v ) } );
elseif k == 'OCLC' then
table.insert( new_list, {handler.label, oclc( v ) } );
elseif k == 'OL' or k == 'OLA' then
table.insert( new_list, {handler.label, openlibrary( v, handler.access ) } );
elseif k == 'PMC' then
table.insert( new_list, {handler.label, pmc( v, options.Embargo ) } );
elseif k == 'PMID' then
table.insert( new_list, {handler.label, pmid( v ) } );
elseif k == 'S2CID' then
table.insert( new_list, {handler.label, s2cid( v, handler.access ) } );
elseif k == 'SBN' then
table.insert( new_list, {handler.label, sbn (v, accept) } );
elseif k == 'SSRN' then
table.insert( new_list, {handler.label, ssrn( v ) } );
elseif k == 'USENETID' then
table.insert( new_list, {handler.label, usenet_id( v ) } );
elseif k == 'ZBL' then
table.insert( new_list, {handler.label, zbl( v ) } );
else
error( cfg.messages['unknown_manual_ID'] );
end
end
local function comp( a, b ) -- used in following table.sort()
return a[1]:lower() < b[1]:lower();
end
table.sort( new_list, comp );
for k, v in ipairs( new_list ) do
new_list[k] = v[2];
end
return new_list;
end
--[[--------------------------< E X T R A C T _ I D S >------------------------------------------------------------
Populates ID table from arguments using configuration settings. Loops through cfg.id_handlers and searches args for
any of the parameters listed in each cfg.id_handlers['...'].parameters. If found, adds the parameter and value to
the identifier list. Emits redundant error message if more than one alias exists in args
]]
local function extract_ids( args )
local id_list = {}; -- list of identifiers found in args
for k, v in pairs( cfg.id_handlers ) do -- k is uppercase identifier name as index to cfg.id_handlers; e.g. cfg.id_handlers['ISBN'], v is a table
v = select_one( args, v.parameters, 'err_redundant_parameters' ); -- v.parameters is a table of aliases for k; here we pick one from args if present
if is_set(v) then id_list[k] = v; end -- if found in args, add identifier to our list
end
return id_list;
end
--[[--------------------------< E X T R A C T _ I D _ A C C E S S _ L E V E L S >--------------------------------------
Fetches custom id access levels from arguments using configuration settings.
Parameters which have a predefined access level (e.g. arxiv) do not use this
function as they are directly rendered as free without using an additional parameter.
access-level values must match the case used in cfg.keywords_lists['id-access'] (lowercase unless there is some special reason for something else)
]]
local function extract_id_access_levels( args, id_list )
local id_accesses_list = {};
for k, v in pairs( cfg.id_handlers ) do
local access_param = v.custom_access; -- name of identifier's access-level parameter
if is_set(access_param) then
local access_level = args[access_param]; -- get the assigned value if there is one
if is_set (access_level) then
if not in_array (access_level, cfg.keywords_lists['id-access']) then -- exact match required
table.insert( z.message_tail, { set_message( 'invalid_param_val', {access_param, access_level}, true ) } );
access_level = nil; -- invalid so unset
end
if not is_set(id_list[k]) then -- identifier access-level must have a matching identifier
table.insert( z.message_tail, { set_message( 'err_param_access_requires_param', {k:lower()}, true ) } ); -- parameter name is uppercase in cfg.id_handlers (k); lowercase for error message
end
id_accesses_list[k] = cfg.keywords_xlate[access_level]; -- get translated keyword
end
end
end
return id_accesses_list;
end
--[[--------------------------< S E T _ S E L E C T E D _ M O D U L E S >--------------------------------------
Sets local cfg table and imported functions table to same (live or sandbox) as that used by the other modules.
]]
local function set_selected_modules (cfg_table_ptr, utilities_page_ptr)
cfg = cfg_table_ptr;
has_accept_as_written = utilities_page_ptr.has_accept_as_written; -- import functions from select Module:Citation/CS1/Utilities module
is_set = utilities_page_ptr.is_set;
in_array = utilities_page_ptr.in_array;
set_message = utilities_page_ptr.set_message;
select_one = utilities_page_ptr.select_one;
substitute = utilities_page_ptr.substitute;
make_wikilink = utilities_page_ptr.make_wikilink;
z = utilities_page_ptr.z; -- table of tables in Module:Citation/CS1/Utilities
end
--[[--------------------------< E X P O R T E D F U N C T I O N S >------------------------------------------
]]
return {
auto_link_urls = auto_link_urls, -- table of identifier URLs to be used when auto-linking |title=
build_id_list = build_id_list,
extract_ids = extract_ids,
extract_id_access_levels = extract_id_access_levels,
is_embargoed = is_embargoed;
set_selected_modules = set_selected_modules;
}